Hello Everyone! I wanted to show you my current findings on how I achieved 30MH/s on my Micron memory based MSI Armor OC RX 580 8gb. I am sure you may or may not get the same results but this is how I was able to get MORE MH/S out of my card. Please note I am not a pro Youtuber just wanted to spread the wealth instead of you having to buy it on Ebay for up to 15 bucks.PLEASE MAKE A BACKUP OF YOUR UNMODIFIED BIOS BEFORE FLASHING USING GPUZ!! In the ATI Flash folder you have the modified bios at the bottom of the folder.
If this video worked for you please like or donate if not it's ok I know your just starting out :)
FLASH AT YOUR OWN RISK!! I AM NOT RESPONSIBLE IF IT BRICKS YOUR CARD. PLEASE TRY CHANGING YOUR SETTINGS FIRST IN GLOBAL SETTINGS BEFORE FLASHING THE MODIFIED BIOS!!
[email protected] I wish I could help out more but I don’t have anymore Radeon cards because I sold them to buy a GTX Titan. I am sorry. This guide is still up as a reference. But have you checked MSI for the bios?
Hi dude, do you know why Afterburner wants nothing to show me about my RX580 while for my 1070 it allows me settings. On the contrary TRIXX only displays my RX 580 and not my 1070? I installed the crimson 17.10.3 because with the latest driver AMD crimson TRIXX does not show me anything (no graphics card). I would have liked to make settings to consume less electricity (you have a solution for that?) Many thanks for the help you will bring me.
my settings on wattman : coreclock (-17%) et vclock (769-925-1106 for all) and 2140 Mhz for the memory clock (950 vmemroy i believe, so the number who was write, idont change it) I passed 27 MHS at 29,8 MHS
I managed to get 29.8 Mhs on my 7 RX580 8g (Micron) and 31 Mhs on my 1070 with a decrease of 130 watts just by lowering the coreclok and its voltage and increasing as lightly the clockmemory slightly. To see if it remains stable over several hours and days.
On the other hand if someone knows how to save the settings on AMD Wattman I am a taker.
Thank you Daniel for your very precious help and your very informative video !!
I will look for other ways to reduce the energy cost without affecting my performance and without flashing the bios.
Thank you very much !!!!
Thank you Daniel for your advice. I just saw that I had Wattman supplied with the AMD driver. Now remains to see how to change the settings for CoreClock and Clock Memory as well as the voltage.
Do you know Wattman? if so how can we change this in because with EVGA Trixx it does not seem to work in any case the changes are not taken into account. thank you
In windows go to the search field and tape "amd settings" and let's go in game->general settings->gpu workload will be appear and select compute and save for all cards et modify the coreclock and vcore and memory clock and your cards will mine at 29-30 Mhs and voila ! and more if you're are rich and if you are not afraid to burn your cards lol ! let's read my discussion i explain how i keep 130 watt less with undervolting and overclocking the memory. Good luck
I am.about to build a 5 gpu eth rig 3 x aurous rx580 8 gig and 2 x Rx580 8gig asus strix top oc edt would you recommend a asus Z270a prime or the new gigabyte H110 D3a ?
Why is your gpus not undervolted ?
RIYAAD ALLY MOHAMED I am using a Ryzen build and not intel so I haven’t looked at at these boards. As for undervolting my gpu this was a tutorial on how I achieved the 30 MH/s I didn’t really undervolt my gpu but I do have a modded bios in the description. I didn’t tweak with the gpu voltage just copied and pasted the strap which worked fine for me.
IspranMozak hmm the only thing I can say is just reinstall afterburner and try it again because the drop down box always picks up the other cards. Have you clicked on it to see if all you need to do is scroll down?
Zamiul_SR to be honest I was getting around 3.25 US dollars a day on this 1 GPU. But that doesn’t mean it’s going to be this price because how volatile the crypto market is, meaning could be more, could be less. Also Samsung is coming out with a possible Etherium ASIC so keep that in mind.
Made a little overclocking and I can reach at 30Mh/s but the temp is reaching at 75 degrees....
adjusting the overclock to reduce temp to 70 below... I can only reach at 29 Mh/s... happy with it... I only wish I can lower down the temp more.... at least at 28 Mh/s
there are universal mods that you can use to any of your gpu. That helped me hash a bit more than 27-28Mh/s. Always make sure to back up your original BIOS using ATI winflash or GPU-Z. Im hashing at a stable rate of 29Mh/s by using the universal Time Values i found on youtube. With a little overclocking (just a little bit), you can easily hash at an approx 30-31Mh/s.
Be mindful of your Hardware's capability though to not push it too much as your pc may freeze and you may have to restart and go back to square one.
Check this out by BuriedONE Cryptomining regarding the universal BIOS Modding: https://www.youtube.com/watch?v=JKM60VVIfRg
Apparently, Micron memory somehow is special. Couldn't see any specific solution on how to bump up the speed to approx 30Mh/s. I saw some universal Time Values but it just doesn't help bringing the figures up until I come across on your tut. It's the amd software all along! :)
You're right. It's actually what I learned as well while fiddling with them. It's best to directly connect the monitor to the gpu only if on a testing stage and modding the bios of the graphics card ONE BY ONE. During the full swing (all gpu's running), it's best to connect the monitor to the main board. I found out that, windows 10 is acting up and corrupting an important system file that disables the Windows task bar and that includes the Windows Home Button and Search Button. It's easy to overlook this issue but it forced me to reinstall a fresh OS.
I'm using an Intel Pentium Processor.
June Anthony Duque what cpu do you have? If you have a cpu with integrated graphics just plug into the Motherboard and not use the GPU’s. Also check the Risers, that is another problem because a bad one can mess up the whole system. It will be time consuming but go through all risers through a known working GPU then once you have done that attach each GPU to the motherboard and restart but only with one GPU installed to see if that one is bad.
Yes. The challenge now is to get the display working as when I plugged my 8 gpus to the motherboard, there is no display coming out. Im using an HDMI and I tried to plug it to each gpu, still no display. Any idea why?
Magnr is a handy cross-platform trading site connected to a few big Bitcoin exchanges. Accounts never require any personal data or identitiy proof. So signup is quick and possible with anonymous data.
Leverage is available at Kraken up to 5x for several cryptocurrency pairs, including bitcoin. The fees are depending on the volume of the margin account.
Bitcoin can be traded on GDAX up to 5x leverage. The margin trading option must be manually turned on the account in order to make sure the users understands and reads the associated risks.
Margin trading is basically borrowing funds to purchase an asset, this allows you to buy more bitcoins that you would normally be able to do normally in the hope of making bigger profits on the price movements.
Advantages of Margin Trading.
The biggest benefit of margin trading is that you can take advantage of the additional funds when the market moves in the direction you expected. The overall profit of the positions once the bitcoins are soled and the loan is repaid is significantly higher compared to an ordinary trade execution.
Disadvantages of Margin Trading.
The disadvantage of margin trading is by nature the amount of risk a margin account can hold. The higher amount of leverage you take the bigger amount of money you can loose in case the market moves in an unfavorable way. Due to the margin call, the margin account must be funded countinuesly that involves significant amount of liquidity. It is only advisable to trade on marking if you have enough experience already on the market. To mitigate the associated risk, many trading platforms only offers limited amount of leverage trading opportunites.